Skip to content
GEEKVAPE AEGIS ETENO E100 POD MOD KIT
Contact Us - Vaporisers
Do you have a question about our products, service, or vaping?
You can reach us at askvaporisers@gmail.com
Our dedicated customer support team is available 24/7 to help & advise on any issue you may have.
Shipping Questions:
Please check our shipping page for shipping information and the latest service updates.
I Want to Cancel My Order:
If you want to cancel your order, we will do our best to stop it from shipping, but this is not guaranteed. Orders cannot be canceled once a tracking link has been generated, but they can be returned, subject to our Returns Policy. Our agents are on hand to assist with this.
Product Information
Aegis E100 Eteno Pod Mod Vape Kit by GeekVape is for vaping enthusiasts looking for a compact and powerful device. The kit includes an Eteno E100 Pod with large 4.5mL e-juice capacity that’s perfect for direct-lung (DL) vaping with its 810 drip tip, top airflow adjustment and sub ohm Geek Vape P Series Coils. While powerful, the Eteno Replaceable Pod is easy to maintain with top fill and simple coil change. The Geek Vape Eteno Mod, a comfortable and ergonomic device, produces up to 100W of power and is compatible with an 18650 battery. The Eteno E100 Mod also features a quick-lock switch for convenience and added safety, and an IP68 rating of water, dust and shock proof for durability which makes it a long-lasting vapouriser.
AEGIS ETENO MOD IS COMFY BUT POWERFUL
The GeekVape Aegis Eteno E100 Mod will give you the large vape clouds you’re looking for but it’s also very comfortable to hold. It has a perfect width that you can wrap your hand around as if holding a sword (as you would do on a daily basis) and the cushioned panel adds to the hand comfort. Yeah, yeah, it’s not all about the hold, how does it vape? Amazingly well with the following features:
- Easy navigation – switch between modes with three clicks of the fire button.
- Pre-set modes – Power Mode, Smart Mode, and BOOST Mode for a tailored vaping experience:
- Boost Mode – automatically gives you draws at the maximum power the coil can handle. You can’t change wattage, in fact, you can’t even see the wattage but you taste the beastly, tasty vapour flavour and feel the large vape clouds.
- Smart Mode – recognises coil and sets recommended wattage for you.
- Advanced modes – Temperature control and VPC to fine-tune your vaping experience futher.
- Removeable 18650 battery (not included) - allows you to swap out batteries to continue vaping and charge them separately with a battery charger.
- Secure battery door – a screw-in battery cap at the bottom of the mod securely holds in and protects your battery from water, dust and escaping when dropped.
- Tri-proof durability – the Geek Vape Aegis Eteno E100 Mod lets you vape with ease, knowing that it can handle being dusty, wet or accidentally dropped.
- Upright charging – convenient Type-C charge port lets it charge standing up.
- 100W – enough to power all GeekVape P Series Coils.
- Quick-lock – one flick of the switch on the side conveniently locks all your buttons for safety (can't vape when locked).
- Bright, clear screen – see your settings clearly.
- Good looks – beautiful colour selection with a style to suit every vaper. We’re lovin' that race-car red!
TOP AIRFLOW ETENO E100 MOD
Enjoy a more leak-proof vaping experience with the Geek Vape Eteno E100 Pod! The top airflow adjustment means that leaks are minimised when compared to bottom airflow where e-liquid tends to escape because of, well, gravity. That’s not all you’ll love about the Eteno E100 Replaceable Pod with features like these:
- Intense adjustable airflow – enough air intake to accommodate deep DL draws.
- Superb vapour flavour – GeekVape P Series Coils ensure high power and great-tasting vapour.
- 810 drip tip – fit for purpose with a wide bore for maximum vapour intake and removeable so you can clean it easily.
- Secure – strong magnets hold it on the Aegis Eteno Mod while providing convenient removal for a coil change – no unscrewing needed.
- Effortless coil change – remove the pod from the mod, pull out the old coil and plug in the new from the bottom. Simple.
- Convenient top fill – quarter-turn the Eteno Pod’s top cap and fill via one of the two large fill ports on either side of the coil hole.
- See all your vape juice – transparent tube allows for easy e-liquid monitoring; keep vape juice above the coil’s cotton cut-outs for best vaping and coil longevity.
- Durable plastic tube – won’t break as easy as glass if dropped.
- Converts to a vape tank – purchase the Eteno E100 510 Adapter to convert the Eteno Pod into a pod tank and use it with other vape mods!
- DL vaping – vape like you breathe, inhaling vapour straight to your lungs for large vape cloud production. The sub-ohm, high-wattage P Series Coils, ample airflow, wide drip tip, 100W power and modes to tailor your vaping contribute to a very pleasurable DL vaping experience with the Aegis Eteno Pod Mod Kit.
With great power comes great responsibility. Yeah, we watched Spider-Man recently… But it applies to powerful vapourisers. The 100W GeekVape Aegis Eteno E100 Pod Mod Kit gives you power but adds safety with its A-Lock switch, easy navigation, upright charging and secure battery door. All that so you can enjoy the power in a compact vape kit.
Please note:
- The mod is water, dust and shock proof but the Eteno E100 Pod is not.
- We don’t recommend this kit for beginner vapers or those who like mouth-to-lung (MTL) vaping.
- It's essential to prime new coils before vaping.
- Place a few drops of vape juice in the coil centre.
- Install the coil in the pod.
- Remove top cap and fill with vape juice.
- Screw top cap back on the pod.
- Cover the air holes at the bottom of the pod with your finger while gently taking about five short draws on the mouthpiece. This draws e-liquid to the coil’s cotton to saturate it and avoids getting dry hits or prematurely burning your coil.
- Install the pod on the mod and vape.
GEEKVAPE AEGIS ETENO E100 POD MOD KIT SPECIFICATIONS:
- Dimensions (with pod attached): 134.50 x 33 x 39.56mm
- Vape juice capacity: 4.5mL
- Coil resistance of Geek Vape P Series Coils included:
- 0.2 ohm - 60-70W
- 0.4 ohm - 50-60W
- Coil material: mesh KA1 (kanthal)
- Pod material: PCTG plastic (BPA-free)
- Output power: 5-100W
- Battery: 18650, replaceable - not included
- Stunningly leak-proof design with top airflow control
- IP68 rating
- DL vaping ability
- 1.06 inch colour OLED screen
- Intelligent modes on AS-Chip 3 (Smart, Boosting, Power, VPC and Temperature Control - nickle, titanium, stainless steel)
PACKAGE INCLUDES:
- GeekVape Aegis Eteno E100 Mod
- GeekVape Eteno E100 Replacement Pod (4.5mL) with P Series 0.2 ohm Coil (60-70W, pre-installed)
- GeekVape P Series Coil 0.4 ohm (50-60W)
- Coil tool
- Spare parts pack
- USB Type-C charging cable
Specifications
In the Box
Warranty & Returns
At Vaporisers, we take care of all warranty claims. Our goal is to make the warranty process quick and hassle free for our customers.
To ensure that your warranty claim is handled as efficiently as possible, please keep record of your order number (located on your order or shipping confirmation emails, or by logging into your account). You won't need to register your vaporizer to make a claim.*
If your vaporizer is experiencing a fault or you believe it is not working correctly, please complete the warranty form here. Once submitted, our warranty team will contact you with all the details needed to complete your claim, including our shipping address.
A thorough assessment will be conducted on your vaporizer to confirm the fault before a replacement can be issued. Please note we don't repair vaporizers, brand new replacements are issued.
Unsure if your vaporizer is within the warranty period? Simply check the product listing or the user manual.
Shipping and Delivery
Orders are dispatched via USPS with “signature on delivery” for security reasons. Orders dispatched daily on weekdays only (excluding public holidays) Orders received by 9am (EST) will be dispatched the same day.
Once your order has been dispatched, we will send you an email with your USPS tracking number after 5pm. Please check your “Inbox” and your “Junk Mail” for your tracking number as this it is an automated e-mail, Track your delivery at www.usps.com/track
When Will I Receive My Order?
- Standard Shipping: USPS guideline is within 3-7 business days from the day your order is dispatched. If you have not received your order within 7 business days, please email us at vaporisers.com.au@gmail.com and include your confirmation number. Delivery times may take longer in some rural areas.
- Express Shipping: USPS guideline is within 2-3 business days from the day your order is dispatched.
Delivery Notes
- Vaporisers ships orders USA-wide only.
- Make sure your delivery address is full and correct to avoid delays. We can deliver to PO Boxes.
- USPS will not leave orders unattended, please ensure someone is present at your delivery address to accept your order.
- USPS will leave a notification card if no one is present to accept your order. Please ensure your order is collected from your local Post Office within the specified timeframe on the notification card, otherwise your order will be returned to us.
- A re-delivery fee of $14.95 will be charged to re-send your order. Orders can be delivered to your workplace.
- Orders are packaged discreetly and the contents are not visible on your package.
RETURN AND EXCHANGE POLICY
Products are inspected before dispatch and packed with extra care. Upon receipt, please check your order and contact us with any issues as we cannot replace used items. If an item is defective, does not match our description, or it is not fit for its intended purpose, we will offer you a refund or exchange, but is subject to the following process:
Advise us of the issue with your order number, picture and description of the faulty item. We will supply our “order return” details. Return the item to us unused, unmarked and in its original packaging within 3 days of you receiving it.
We recommend registered post as we are not responsible for returns that we do not receive. The delivery cost to return the item to us is at your expense. Replacements will be returned to you at no additional charge.
However, If we receive an item that has been damaged, used, shows signs of wear, not in original packaging, or packaging is damaged, we reserve the right not to replace or refund the item. We will advise you in this event.
Once we have authorised a refund, please allow 3-5 business days to receive your refund.
Refunds will be issued in the same way that you paid for your order. If we assess the warranty claim to be valid and not caused by fault of the customer, we will send you a replacement item and cover the delivery costs.
However if no fault is found with the item, the return postage will be at the customer’s expense. Tanks and Coils:
No warranty is offered on tanks and coils as they are considered “consumables” (designed to be used and thrown away after a certain amount of uses). A DOA (dead on arrival) policy of 36 hours upon receipt applies. Liquids:
For health reasons, we do not re-sell liquids once they have left our premises. We have a strict no-return policy on Liquids.
Please choose carefully. We cannot cancel or refund an order once it has been placed. Unfortunately, products cannot be returned due to damage caused by misuse or negligence.
Need help? Email us at vaporisers.com.au@gmail.com